XW-PC-1-S leakage location system including

Contact us

400-0755-865
0755-83467833
xw@szxiangwei.net
8th FLOOR，Building B,kemulong science and technology park,Guangsheng 5th road,Longhua District,Shenzhen.

Recommend

< >

XW-PC-1-S leakage location system including

资料下载

contact

Detail
Parameter

GENERAL INFORMATION

XW-PC-1-S controller is a wireless intelligent liquid leakage detection device. Through its output of relay contact signal and NB-Iot wireless output, it can be used with various monitoring systems to realize remote alarm and control remote equipment. XW-PC-1-S is suitable for data center, IDC room, library, museum, warehouse and other places that need to monitor liquid leakage.

XW-PC-1-S non positioning leakage detection controller is a liquid leakage detection device with simple operation and high cost performance. It can select different response sensitivity through dial switch on the panel to adapt to different detection environment and level requirements. The relay contact signal and 485 interface output by XW-PC-1-Ss leakage detection controller can be integrated with various monitoring systems to realize remote control.

Design reliability

Most components in XW-PC-1-S controllers are imported components, which can not only ensure high sensitivity during detection, but also reduce false alarm caused by various external factors. XW-PC-1-S has unique surge protection function and two groups of leakage alarm relays.

Software flexibility

XW-PC-1-S controller supports software to adjust address, baud rate and sensitivity. Users can select different response sensitivity according to the requirements of detection environment.

Simple operation

XW-PC-1-S controller is applicable to standard industrial module and DIN rail installation. All wiring can be easily completed through terminal blocks. When leakage occurs, relay works and leakage indicator light will be on. After trouble shooting, the controller will automatically reset and return to normal state without manual operation.

Technical Data
Basic characteristics	Response time	≤2S
	Detection distance	500m
	Size	85.8x70x57.5mm
Environmental ratings	Storage temperature	-20°C~60°C（-4°F~140°F）
	Working temperature	-10°C~50°C（14°F~122°F）
	Humidity	5%~95% RH（no condensation）
Power requirements	Power supply	DC 12~24V，power less than 2W
RS-485 interface	Communication protocol	MODBUS-RTU
	Baud rate	Defaulted as 9600 bit/s; 2400, 4800, 19200 bit/s can be selected.
	Data format	N,8,1
Relay	Characteristic	1 group. Normally open or normally closed.
Relay	Ratings	Load voltage < 60V, Output impedance at alarm < 50Ω

System Description

Xiangwei leakage location system including: controller, sensing cables, outgoing line, power, other assemblies, etc.

According to relay output signal, XW-PC-1-S can control peripheral devices such as audible and visual alarm, phone dialer, switch value acquisition module, short message module, etc.

Installation conditions

eq \o\ac(○,1)1Please install the controller in a firm indoor collection box or cabinet or other places easy to maintain and check. The installation position shall be protected from the elements, temperature extremes or heavy vibration, corrosive gas environment and other electronic interference sources, etc.

eq \o\ac(○,2)2The XW-PC-1-S is designed to be snapped onto standard 35 mm DIN rail. Existing electrical or instrumentation cabinets with spare rail space make good mounting locations. The controller power should be off during installation.

Classified by product type

Classified by product use

Classified by industry

other products

Contact us

Recommend

XW-PC-1-S leakage location system including

Online message

在线留言