XW1100B sensing cable has the advantage of low cost and high reliability. With the Nylon sheath, It make the cable effectively complete the monitoring mission in a more complex environment for a long time. It is used with XW-DC seris controller in pair though it also applies universally to most  alarm hosts. It is used in the regional leakage detection (leakage detection system based on short circuit theory). Compared to parallel structure, its helical structure can reduce the false alarm caused by the electrostatic, improve the strength and the service life of the cable greatly. It can detect the presence of water along its length. Installed with a alarm module, the cable senses water intrusion, triggers an alarm.

Distributed sensing

XW1100B sensing cables provide distributed leak detection over a wide range of areas. The cable is available in a variety of lengths to provide as much coverage as needed.

Design flexibility

XW1100B sensing cable is supplied with factory-installed plastic connectors that plug together. The cable is designed for a range of applications, including data center subfloors, telecommunication rooms, HVAC equipment locations, pipes, electrical vaults, storage areas, tanks, and roofs. The cable is small, lightweight, and flexible, allowing easy installation.

Advanced technology

The design of XW1100B has been improved based on XW1100. The cable is wrapped with nylon sheath. And it also is constructed of 2 light but high density polyethylene sensing wires sensing wires, an alarm signal wire, and a continuity wire which are coiled and pressed together into a helix. The 2 detection wires in the helix make 2 circuits with 2 metal wires in the framework. This structure reduces the cable diameter and material cost. The rugged cable construction exposes no metal, and enables the cable to be reused even in corrosive environments. XW1100B sensing cable is mechanically strong and resistant to corrosion and abrasion. 

Ordering Information

XW1100B modular sensing cable with factory-installed connectors

It can be customized to different length according to the actual situation.

Notes:

Cable Characteristics

Cable diameter                             6.0 mm nominal

External resistance                          20 ohm /100 meters

Carrier                                     light but high density polyethylene, nylon

Cable weight                               0.028 kg/meter

Cable color                                Yellow

Maximum exposure temperature               85°C

Note:

• Sensing cable should avoid contact with metal objects with the process of laying.
• Sensing cable to keep dry and clean during laying.
• Sensing cable laying area should avoid electrostatic interference.
• Sensing cable contact or overlap in the laying area are not allowed.
• Sensing cable should not soaking by the dirty water or other chemicals in a long time.