XW1000Bheat-resistant sensing cables

Contact us

400-0755-865
0755-83467833
xw@szxiangwei.net
8th FLOOR，Building B,kemulong science and technology park,Guangsheng 5th road,Longhua District,Shenzhen.

Recommend

< >

XW1000Bheat-resistant sensing cables

XW1000B heat-resistant sensing cables is the world’s first super high temperature resistance sensing cable. It can operate reliably in 100℃ and detect the presence of hot water at any point along their length.

资料下载

contact

Detail
Parameter

XW1000B heat-resistant sensing cables is the world’s first super high temperature resistance sensing cable. It can operate reliably in 100℃ and detect the presence of hot water at any point along their length. Installed with a alarm and locating module (XW-PC-3), the cable senses water intrusion, triggers an alarm, and pinpoints the location.

Distributed sensing

XW1000B heat-resistance sensing cables provide distributed leak detection and location over a wide range of areas. The cable is available in a variety of lengths to provide as much coverage as needed.

Design flexibility

XW1000B heat-resistance sensing cable is supplied with factory-installed plastic connectors that plug together. The cable is designed for a range of applications, including data center subfloors, telecommunication rooms, HVAC equipment locations, pipes, electrical vaults, storage areas, tanks, and roofs. The cable is small, lightweight, and flexible, allowing easy installation. The smooth design allows for quick drying.

Advanced technology

The conductive-polymer technology and fluoropolymer construction make XW1000B sensing cable mechanically strong and resistant to corrosion and abrasion. The cable is constructed of two sensing wires, an alarm signal wire, and a continuity wire embedded in a fluoropolymer carrier rod. The alarm module constantly monitors the sensing cable for continuity. The rugged cable construction exposes no metal, and enables the cable to be reused even in corrosive environments

Working principle

When there is water contact, the two sensing wires will be short circuited, resulting in the change of current. According to the proportional relationship between the resistance and the length of the conductor, through the rapid processing of the controller, the specific leakage location can be provided.

Cable parameter

Cable diameter	6.0mm
The lines of continuity and signal lines	2x26 AWG，Containing fluorine polymer insulation
The sensing line	2x30 AWG，With electrical conductivity fluoropolymer sheath
Carrying pole	Fluoropolymer materials
Cable weight (15 meters)	750g
Wire color (skeleton)	yellow

Technical specifications

abrasive resistance	>65 cycles
The highest continuous working temperature	105℃
Fire resistance	Level 2 cables
Applied for	90Kg
Alarm (water leakage)	Leaking induction anywhere along the line: maximum 30 mm
The drying time	Cable from the static water is dry and reset within 15 seconds
Standard cleaning method	With a clean damp cloth to wipe

Installation instructions

Induction line in the process of laying keep dry and clean.
Sensor cable need to be used under the specified working temperature, do not contact with open flame.
Induction line in the docking process, please pay attention to male female connector pins order, alignment hole location and gently insert lock screw clockwise loops (counterclockwise).
Sensor cable laying area should be avoided by electrostatic interference.
Sensing line shall not be dirty water or other chemicals soak for a long time.
Induction line should be close to the ground installation, the maximum contact leakage of liquid.
Induction line installed on the ceiling, the need to consider using fluid tank, to prevent leakage under the damage of equipment.

Classified by product type

Classified by product use

Classified by industry

other products

Contact us

Recommend

XW1000Bheat-resistant sensing cables

Online message

在线留言