XW1000 sensing cables

Contact us

400-0755-865
0755-83467833
xw@szxiangwei.net
8th FLOOR，Building B,kemulong science and technology park,Guangsheng 5th road,Longhua District,Shenzhen.

Recommend

< >

XW1000 sensing cables

XW1000 sensing cables detect the presence of water at any point along their length. Installed with a alarm and locating module, the cable senses water intrusion, triggers an alarm,

资料下载

contact

Detail
Parameter

XW1000 sensing cables detect the presence of water at any point along their length. Installed with a alarm and locating module, the cable senses water intrusion, triggers an alarm, and pinpoints the location.

Distributed sensing

XW1000 sensing cables provide distributed leak detection and location over a wide range of areas. The cable is available in a variety of lengths to provide as much coverage as needed.

Design flexibility

XW1000 sensing cable is supplied with factory-installed plastic connectors that plug together. The cable is designed for a range of applications, including data center subfloors, telecommunication rooms, HVAC equipment locations, pipes, electrical vaults, storage areas, tanks, and roofs. The cable is small, lightweight, and flexible, allowing easy installation. The smooth design allows for quick drying.

Advanced technology

The conductive-polymer technology and fluoropolymer construction make XW1000 sensing cable mechanically strong and resistant to corrosion and abrasion. The cable is constructed of two sensing wires, an alarm signal wire, and a continuity wire embedded in a fluoropolymer carrier rod. The alarm module constantly monitors the sensing cable for continuity. The rugged cable construction exposes no metal, and enables the cable to be reused even in corrosive environments.

Working Principle

When there is water contact, the two sensing wires will be short circuited, resulting in the change of current. According to the proportional relationship between the resistance and the length of the conductor, through the rapid processing of the controller, the specific leakage location can be provided

Cable parameter

Cable Characteristics

Cable diameter 6.0 mm nominal

Continuity and signal wires 2 x 26 AWG with insulation of ﬂuoropolymer

Sensing wires 2 x 30 AWG with jacket of conductive ﬂuoropolymer

Carrier Fluoropolymer

Cable weight(50 ft/15 m length) 0.5kg

Cable color High-visibility yellow or brown

Technical Information

Abrasion resistance >65 cycles per UL 719

Maximum continuous operating temperature 75°C

Fire resistance Class 2 plenum cable per NEC 1996 725-71 (a)

UL 910 Modiﬁed Steiner Tunnel Test

Breaking strength Cable only: 90 kg

Induction line in the laying process to avoid contact with metal objects
Induction line in the process of laying keep dry and clean
Induction line in the docking process, please pay attention to male female connector pins order, alignment hole location and gently insert lock screw clockwise loops (counterclockwise)
Sensor cable laying area should be avoided by electrostatic interference
Induction line in laying area are not allowed to overlap or contact
Sensing line shall not be dirty water or other chemicals soak for a long time
Induction line should be close to the ground installation, the maximum contact leakage of liquid

Classified by product type

Classified by product use

Classified by industry

other products

Contact us

Recommend

XW1000 sensing cables

Online message

在线留言