Touch screen monitoring system

Contact us

400-0755-865
0755-83467833
xw@szxiangwei.net
8th FLOOR，Building B,kemulong science and technology park,Guangsheng 5th road,Longhua District,Shenzhen.

Recommend

< >

Touch screen monitoring system

资料下载

contact

Detail
Parameter

Shenzhen Cheung for the development of a set of touch-based software and hardware integrated dynamic environment monitoring system, especially for small and medium-sized computer room, base stations, distribution rooms, warehouses and other places of the dynamic environment monitoring, which has low cost, easy installation, easy maintenance Features, touch screen can be used as a host alone, but also as a terminal, to achieve rapid deployment, network monitoring.
System design

Power monitoring system mainly consists of touch screen monitoring host, acquisition and transmission equipment, front-end sensors, the system can be divided into distribution monitoring subsystem, UPS monitoring subsystem, air conditioning monitoring subsystem, submersible monitoring subsystem, temperature and humidity control subsystem, smoke Monitoring subsystem, SF6 monitoring subsystem, the subsystems can work alone, according to the need to configure, but also coordination and cooperation to jointly ensure the safe and smooth operation of power.
1, distribution monitoring subsystem
Power distribution monitoring includes the monitoring of the switch and the monitoring of the power parameter. The switch monitoring is realized through the XW-886 module, and the power parameter is realized through the power meter. These two kinds of apparatuses upload the signal to the touch screen through RS485, reveal the working condition of the apparatus through the analysis of the software.

2, UPS monitoring subsystem
Through the intelligent UPS on the RS232 serial port to collect data to understand the working status of the UPS, because the UPS data volume is relatively large, and the limited number of serial ports on the touch screen, under normal circumstances, only a UPS system, if you need to connect multiple UPS, by XW-8520 communication conversion module to achieve expansion.

3, air-conditioning control subsystem
Precision air conditioning monitoring through its smart interface to monitor, if the engine room for the non-precision air conditioning, air conditioning through the increase of XW-AC485T controller to achieve air-conditioning calls from the start and automatic settings and other functions.

4, flooding monitoring subsystem
Indoor installation of a non-directional leak detector XW-DC-04 and its associated non-directional water leakage sensor line XW1100, with leads to the controller, the sensor wire connection, the use of fixed tape or other fixed cable live.
XW-DC-04 controller will be the beginning of the amount of information into the XW-8053 acquisition module, and then through the 485 bus access signal to the touch screen host, focus on monitoring flooding, when there is leakage, the system will perform related linkage operation and through the XW -1103 SMS alerts, etc. notify users in a timely manner.

Classified by product type

Classified by product use

Classified by industry

other products

Contact us

Recommend

Touch screen monitoring system

Online message

在线留言