XW-DC-01

Contact us

400-0755-865
0755-83467833
xw@szxiangwei.net
8th FLOOR，Building B,kemulong science and technology park,Guangsheng 5th road,Longhua District,Shenzhen.

Recommend

< >

XW-DC-01

资料下载

contact

Detail
Parameter

GENERAL INFORMATION

XW-DC-01 photoelectric leakage detection sensor, by applying all-sealed structure, ensures its high precision and reliability. The product has the characteristics of high sensitivity, rapid response, easy to use, easy to install, etc. XW-DC-01 is suitable for data center, IDC room, communication base station, workshop, hotel, warehouse, oil storage and other places that need leakage monitoring.

Product Features

Most components in XW-DC-01 sensors are imported components, which can not only ensure high sensitivity during detection, but also reduce false alarm caused by various external factors.

XW-DC-01 has 1 group of leakage alarm relay.

The sensor adopts explosion-proof design and can be installed and used in places with explosion-proof requirements, such as gas station, oil depot, dust concentration space, etc.

By applying photoelectric detection principle, the sensor escapes strong light interference.

The probe adopts corrosion-resistant spherical protective cover to extend its service life.

By using screw fixing and positioning holes, the three holes installation make the sensor firmly and reliably install.When leakage occurs, relay works.After trouble shooting, the sensor will automatically reset and return to normal state without manual operation

Technical Data
Basic characteristics	Using area	Communication base station, precision machine room, warehouse, etc.; unique explosion-proof design can be used in high security places such as gas station, oil storage, etc.
	Detection objects	Water, < 30% weak acid and alkali, gasoline, diesel, etc.
	Size	Φ47x42.5mm
Environmental ratings	Storage temperature	-20°C~60°C（-4°F~140°F）
	Working temperature	-10°C~50°C（14°F~122°F）
	Humidity	0~100% RH（no condensation）
Power requirements	Working voltage	9-30VDC (DC12V or DC24V is recommended）
	Rated power	0.2W
	Power frequency withstand voltage	0.5kV/1min 1mA
	Insulation resistance	>100MΩ
Relay	Characteristic	Normally open state.
Relay	Ratings	AC120V，2A，DC24V，2A

System Description

Xiangwei leakage location system including: sensor, outgoing line, other assemblies, etc.

According to relay output signal, XW-DC-01 can control peripheral devices such as audible and visual alarm, phone dialer, switch value acquisition module, short message module, etc.

Installation condition

Please install the sensor on a firm floor or sink, and avoid high temperature, high humidity, vibration, corrosive gas environment and other electronic noise interference sources. XW-DC-01 sensor is installed with screw fixing locating hole. Please connect the wires when the sensor power is off

Important：The XW-DC-01 is an electronic unit. Take the following precautions to avoid damage to electronic components:

Handle with care and avoid mechanical shock and impact. (Do not change the original structure)

Keep dry. (Do not touch it with a wet hand). During regular inspection and maintenance, please avoid using organic solvent and wipe with dry cotton yarn.

Check the power related voltage and controller related voltage before installation.

Check the related load.

Avoid exposure to static electricity by touching a nearby piece of grounded equipment or water pipe prior to handling the XW-DC-01.

Avoid contact with metal filings, grease, pipe dope and other contaminants.

Red wire	Connect the red wire to positive pole of the power supply (+).
Black wire	Connect the black wire to negative pole of the power supply (-).
Yellow wire	Connect the yellow wire to common terminal of the dry contact.
Green wire	Connect the green wire to open terminal of the dry contact.

Debugging Instruction

After all the wire connections, user can follow below to do the debugging test.

eq \o\ac(○,1)1When the controller is powered on, set the gear of the multimeter to the beep position. The yellow and green wires are in the disconnect state. If they are in the closed state, it may be due to the device abnormality, etc., please contact our company.

eq \o\ac(○,2)2Fetch a little bit tap water and submerge the sensor probe protective cover in the water. After 1 second, the relay works. The yellow and green wires are connected. Wipe off the water on the sensing cable and reset the relay. And the yellow green line is disconnected

Classified by product type

Classified by product use

Classified by industry

other products

Contact us

Recommend

XW-DC-01

Online message

在线留言